Incineration system

Akkhie Prakarn Public Company Limited has the capability to eliminate hazardous industrial waste in the form of gases, liquids, solid sludge and infectious waste. To be correct in accordance with academic principles. Safe with modern technological mechanisms, fast, friendly and environmentally safe. Covers all service processes

The incineration of hazardous wastes requires temperature control. Plus, the duration of waste vapor generated from incineration must be long enough to be burnt or completely combusted in the incinerator. The company provides modern hazardous industrial waste disposal services with a two-chamber combustion system to enable complete combustion of hazardous waste. Without pollution to the environment, consisting of

waste disposal process

Primary Combustion Chamber, Rotary Kiln

The rotary kiln is designed in accordance with US.EPA regulations. Hazardous waste is burned at a temperature of not lower than 850 degrees Celsius. It is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly during its operation. There are fire-resistant materials and acid and alkali resistant materials coated inside. It is able to control the duration of the combustion and the amount of hazardous waste burned. Therefore, it can cause a complete hazardous waste combustion reaction. In addition, there is also a Discharge Breaching connecting part for separating the bottom ash or large particles generated from combustion before entering the secondary combustion chamber by rapidly cooling the ash using water to avoid dioxin formation.

Secondary Combustion Chamber (SCC)

Gas produced by the rotary kiln will enter the secondary combustion chamber, where the combustion will occur completely at a temperature of 1,000 to 1,200 degrees Celsius, in order to enhance the capacity of waste gas combustion. This secondary combustion chamber is a cylindrical tube, vertically elongated from the floor. The interior is coated with fire-resistant materials and acid and alkali resistant materials to protect against high corrosion conditions inside the kiln.

waste disposal facility